Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Hydration

Campagnolo Super Record Carbon Water Bottle Holder w/Bottle
$80.00
Complete the look of your Super Record-equipped dream ride with Campagnolo's 18-gram Record Water Bottle Holder. This monocoque carbon marvel holds your bottle in the ideal position for quick and easy entry/exit. It's sleek, it's dreamy, it's 100% Campy.
Surly Do Not Arrest This Person Insulating Sheath
$5.00
Surly's Insulating Sheath does exactly what you would think an insulating sheath would do. It sheaths things in insulation. - Made of 1/8-inch high density open cell foam - Appropriately sized for average beverage (12oz) cans
Zipp Vuka BTA Carbon Bottle Cage
$81.00
Designed and engineered specifically for the Vuka BTA mount, the Zipp Vuka Carbon BTA bottle cage is constructed completely from UD carbon fiber, for low weight and strength, as well as super secure bottle fitment. It's engineered to virtually eliminate bottle launch.
CamelBak Antidote Cleaning Kit
$20.00
CamelBak's Antidote Cleaning Kit keeps your hydration system clean and free of nasty tastes and odors. It includes two brushes: a tube brush for scrubbing the full length of the delivery tube and an effective, corner-reaching reservoir brush. Plus, the two Cleaning Tablets work in just 5 minutes to thoroughly clean your reservoir. Extra drying arms lock the reservoir open and you get a Reservoir Dryer that clicks into your bladder, letting it drain and dry after you've cleaned it.
Specialized Rib Cage II
$25.00
The Rib Cage II is not only a sleek, lightweight water bottle cage, but it's also been designed to be fast in the wind. Of course, it also performs its primary task of holding tight to bottles dutifully, so you won't be losing bottles when the road gets rough. - SWAT-compatible design allows for storage and tool integration. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides a secure bottle retention with easy in-and-out accessibility. - Reinforced composite material improves durability without adding weight. - Sleek, minimalist design with razor-sharp graphics. - Accepts EMT Cage Mount MTB or Road Tool. - Accepts MTB XC Box (when used on compatible frames). - Weight: 33g
Polar Bottle Big Bear
$14.99
The Polar Bottle Sport is the original insulated water bottle that keeps your water cold more than twice as long. Lightweight, squeezable and easy to clean, the Polar Bottle Sport is the go-to bottle for adventurers around the globe. This bottle comes standard with the Polar Bottle Sport cap.
Polar Bottle Artist Series
$10.99 - $12.99
The Polar Bottle Sport is the original insulated water bottle that keeps your water cold more than twice as long. Lightweight, squeezable and easy to clean, the Polar Bottle Sport is the go-to bottle for adventurers around the globe. This bottle comes standard with the Polar Bottle Sport cap.
Polar Bottle Fade Bottles
$10.99
The Polar Bottle Sport is the original insulated water bottle that keeps your water cold more than twice as long. Lightweight, squeezable and easy to clean, the Polar Bottle Sport is the go-to bottle for adventurers around the globe. This bottle comes standard with the Polar Bottle Sport cap.
Polar Bottle Solid Bottles
$12.99
Polar's Insulated Bottles keep liquids cooler, longer so you enjoy crisp, refreshing drinks even at the end of your rides. These excellent bottles are BPA- and chemical-free so every sip tastes great. Plus, they feature an easy-to-clean removable valve, plus a handy and removable carrying loop. This bottle comes standard with the Polar Bottle Sport cap.
Polar Bottle Insulated Bottle (Pattern Series)
$11.99
Polar's Insulated Bottles keep liquids cooler, longer so you enjoy crisp, refreshing drinks even at the end of your rides. These excellent bottles are BPA- and chemical-free so every sip tastes great. Plus, they feature an easy-to-clean removable valve, plus a handy and removable carrying loop.
CamelBak Podium Ice 21oz
$24.99
Keep your water cold 4x longer! We re-engineered our legendary Podium Ice to be the ultimate insulated cycling bottle, even when temps rise into triple-digits. With unmatched aerogel insulation technology, high flow rate, and easy cleanability, the Podium Ice stands second to none. And like our entire Podium collection, it's 100% free of BPA, BPS and BPF and features improved cage fit and the squeezability that CamelBak is known for. - Aerogel Insulation: Keeps water cold 4x longer than other bottles - Optimized Cage Fit: Engineered to securely fit in a variety of bottle cages - Easy Squeeze: Get more fluid with less effort - High Flow, Self-Sealing Cap: Maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: Ride clean, drink clean - Easy-to-Clean Interface: All parts can separate for thorough cleaning - Positive Lock out: For leak-proof transport - Trutaste Polypropylene with Hydroguard: Taste your water and nothing else, time after time.
CatEye Bottle Cage
$5.95
CatEye's nylon bottle cage is impact resistant and lightweight at just 29 grams.
MSW AC-200 Button Bottle Cage
$10.99 - $19.99
• Holds bottles securely • Buttons make bottle entry & exit easy • Fits standard 20–24oz water bottles
Planet Bike PB Cage Water Bottle Cage
$4.99
Planet Bike's PB Cage holds your bottle securely with sturdy 6.2mm-diameter 6061-aluminum tubing and comes in a variety of colors so you can coordinate your bike down to the last detail.
Profile Design Aerodrink Base Bar Bracket
$19.99
Profile Design's Aerodrink Base Bar Bracket is the perfect holder for your Profile Aerodrink bottle. It weighs next to nothing and is built tough to firmly hold bottles and last for years of training and racing. It attaches quickly and easily to all Profile, and most other base handlebars (base bars and bottles sold separately).
XLAB Chimp Carbon Cage
$64.95
XLAB's Chimp Carbon Cage weighs only 36 grams and firmly holds your bottles in place, even over bumpy terrain thanks to 5 pounds of gripping force. It's specifically designed for use with tri bikes and other aero rigs with smaller front triangles that make grabbing bottles from ordinary cages difficult. The Chimp Cage's 30-degree cutoff lets you pull your bottles out at an angle for improved ease of use. Plus, this light carbon cage grips great and has supportive top and bottom tabs so you'll never lose a bottle.
SKS Bottle Cage Adapter
$9.99
The Bottle Cage Adapter lets you fasten a bottle cage to any round tube on your bike. Angle adjustment ensures your bottle is always properly positioned.
MSW AC-100 Basic Water Bottle Cage
$9.99
- Constructed using a 6mm aluminum rod - Embossed MSW logo
Kinetic Twenty20 Bottle Cage
$15.00
The Kinetic Twenty20 Bottle Cage ergonomically improves the simple act of grabbing a drink on the bike. A natural arm motion removes and replaces a bottle at an angle of approximately 20 degrees off-center. The Twenty20 Bottle Cage can be mounted on a bike frame at a 20-degree offset left or right, allowing bottle insertion into the center of the cage, rather than in from the side.
Elite Custom Race
$19.99
- Self-adjusting elastomer to improve bottle retention - Made with high-impact composite material
XLAB Torpedo Versa 500
$154.95
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in—but doesn’t let water out. - Capacity: 26oz (768 mL) - Construction (Versa Mounting Plate): 16-layer unidirectional carbon fiber - Construction (Cage): Carbon Torpedo Cage - Construction (Computer Mount): Nylon Composite - Construction (Bottle): Lead free, BPA-Free and HDPE food-safe certified bottle - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 8.4oz (240g)
XLAB Torpedo Versa Mount - Carbon
$69.95
Carbon BTA hydration mount compatible with Torpedo Versa (sold separately). 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 16-layer unidirectional carbon fiber - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)
XLAB Torpedo Versa Mount - Aluminum
$36.95
Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)
XLAB Torpedo Versa 200
$87.95
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. - Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. - Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out. - Capacity: 26oz (768 mL) - Material: Plate: 6061-T6 Aluminum - Cage: Nylon Composite Vee Cage - Computer Mount: Nylon Composite - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 9.3oz (265g)
Zipp Alumina Bottle Cage
$38.00
Optimized for both side and direct bottle entry, Zipp's Alumina cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle. - 27 grams
Portland Design Works Bird Cage
$19.00
Replace your boring old bottle cage with Portland Design Works' fresh take on the H2O holder. The Bird Cage is made of lightweight 5052 alloy in the shape of a bird with wings folded to cradle your water bottle. • 57 grams (2 oz) • 5052 alloy • Includes two stainless bolts
Minoura SBH Saddle Bottle Cage Adapters
$6.99 - $18.99
- Saddle rail mounted cages are a great solution for triathletes or anyone looking for more bottle cage options - Model SBH-300 Aluminum adapter clamps to saddle rails for dual bottle cage location behind the saddle, hardware included - Model SBH-80 Steel adapter clamps to saddle rails for single bottle cage location behind the saddle, hardware included
SKS Anywhere Bottle Cage Adapter
$13.99
- Pair of Velcro attached bosses - Mount a water bottle cage or pump mount on any part of your frame
MSW Up Or Down Water Bottle Cage
$16.99
MSW's Up or Down height-adjustable bottle cage allows for customizable bottle positions. Great for small or irregularly shaped frames, full-suspension bikes, and to make room for frame bags. - Five height positions for 30mm total range - Easy to slide bottles in and out - Durable nylon composite
Profile Design Aqualite
$19.99
Stay aero and stay hydrated with Profile's Aqualite! Featuring an easy-to-refill, no-splash cap, this durable, injection-molded 22-ounce bottle includes an extended straw for easy access. And, the Aqualite fits both wide and narrow-mounted aerobars easily with Profile's Aerodrink bracket (sold separately).
Page 1 of 7 Next page