Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Cranksets

Shimano Altus M361-L Crankset
$44.99 - $49.99
Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings. - Spindle Interface type: Square Taper JIS
Shimano Dura-Ace 9100 11-Speed Crankset
$594.99
- Optimum Power Transfer - Best Balance For Lighter Weight (-7G) And Efficiency - New Designed Crank Arm - Maintains High Rigidity And Reduces Weight - Hollowglide - 4-Arm Construction Crankset - Adapted For Race Specific Disc Brake System - Shorter Length Of Rear Center With O.L.D. 135mm - Redesign The Gear Teeth Profile To Fit Wider Gear Pitch - 50-34T/53-39T/54-42T/55-42T/52-36T - Iconic Design - Chain Line: 43.5
Wheels Manufacturing Inc. FSA PF30 Adapter for 24mm Spindle Cranks
$30.50
Wheels Manufacturing FSA PF30 Adapter for 24mm Spindle Cranks adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on Pressfit 30 frames with FSA's PF30 bottom bracket installed. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. - Machined engineering-grade Delrin - 48g/pr *NOTE: The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
Wheels Manufacturing Inc. Crank Spindle Spacer
$10.00 - $12.00
Use these Wheels Manufacturing Crank Spindle Spacers to adjust chainline or bearing play in bottom brackets. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Machined engineering-grade Delrin - 10 spacers per bag
Wheels Manufacturing Inc. Crank Spindle Wave Washer
$16.00
Wheels Manufacturing Wave Washers help eliminate side play in cranks or pre-loaded angular contact bearings. Please refer to your crankset manufacturer's installation instructions for proper placement. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Uncompressed Thickness: 2.1mm - Compressed Thickness: 0.5mm - Spring Steel - 10 per bag
MRP 2x Steel
$94.95
Designed to work seamlessly with the new wave of 2×10 drivetrains, the 2x utilizes MRP's patented integrated skid chainring protection (US Patents RE 42,436 / 8,235,849 Patents Pending) and features a dual pulley tensioning system. Notable on the 2x system is the absence of a crank-mounted bash guard or guide ring, instead it relies on the front derailleur and cutting-edge lower pulley assembly for complete chain retention. The integrated skid protects the chainrings from impacts without the added weight of a full bash ring. The dual pulley tensioning system ensures that the chain is properly tensioned and in the right position, keeping it on the chainring in the roughest conditions. The dual pulleys also reduce drag and noise compared to other designs, ensuring a better riding experience. Finally, the raised top fin profile prevents the chain from dropping to the BB shell. - Removable integrated skid protects chainrings and glides over rocks and obstacles - Dual pulley design provides precise chain engagement while reducing noise and drag - Raised top fin profile prevents the chain from dropping to the BB shell - BB mounted guides are only compatible with traditional, threaded BB systems
Race Face CINCH Puller Cap with Washer 18mm XC/AM
$6.99
Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread
Race Face CINCH Spindle Kit 30mm
$79.99 - $89.99
Spindle and hardware kit for Race Face CINCH MTB and fatbike cranks.
SRAM GX-1000 2x11 Crankset w/All Mountain Chainguard
$159.00
SRAM's GX 2x11 Crankset W/All Mountain Chainguard delivers consistent performance every time out. Featuring SRAM’s X-GLIDE chainrings, the GX crankset is engineered for 2x11-speed shifting performance. Flawless shifting means you’ll never again compromise your speed and power in unpredictable off-road terrain. No more missed shifts. X-GLIDE puts you in the right gear, right now. • 11-Speed • 6000 series AL • Bottom Bracket compatibility: GXP or BB30 (not included) • X-GLIDE 2x10 shifting technology • Chainrings: 36/24-tooth • Crank lengths: 175mm, 170mm • Color: Black • All Mountain Guard included, but not shown
Campagnolo Chorus Crankset
$525.00
Campagnolo is all about drivetrain evolution, and their Chorus Crankset proves it. The full-carbon cranks and 4-arm spider feature a unified bolt pattern that allows for all three chainring standards. This design incorporates an 8-bolt pattern with a spider arm that not only holds the chainring in place by way of the bolt, but also supports the chainring to increase system rigidity. The crank arms and spider are hollow for maximum stiffness and minimal weight. The integrated Ultra-Torque spindle joins the crankset together via a toothed Hirth joint in the center. - Chainring BCD: Campagnolo 146 Asymmetric, Campagnolo 112 Asymmetric
FSA BB-386EVO/Press-Fit BB30 Bearing Assembly
$49.99 - $199.99
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or stainless steel options
Quarq DZero Aluminum Power Meter Chassis BB30
$779.00
When Quarq set out to build their next-generation power meter, they wanted to build the best-performing power meter for every facet of cycling and triathlon, and for riders at every level. Like its Quarq brethren, the new DZero measures power in the heart of the bicycle — the crankset spider, scientifically proven to be the place for the most accurate measurement. With a new measurement circuit, revised strain gauge design, improved accuracy throughout the pedal stroke and software advances built into the Qalvin App, the DZero represents the state-of-the-art in power meter technology As Quarq’s next generation of power meters, the DZero combines 10 years of technology advances with new features such as dual Bluetooth low energy and ANT+ wireless data transfer, the new Qalvin BLE app. - 10K temperature compensation: Eliminates variables caused by heat and cold to provide an unwavering record of your performance through all conditions - Built to last: Features an IPX7 waterproof rating - Bluetooth low energy technology and ANT+ wireless data transfer - Battery: CR2032, 200-hour battery life, change without tools - OmniCal: swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy within 1.5% - Bottom Bracket Compatibility: BB30 - Forged aluminum models do not work with BBright or BB386EVO bottom brackets
Velo Orange Grand Cru Drillium Crankset
$200.00
Back in the day, we drilled holes in our chainrings to make them lighter. The weight savings were minimal, but they sure looked cool. Velo Orange's Drillium Crankset recaptures the look. It's based on their Grand Cru 110 cranks with a very low 150mm Q-factor. And, while it may look like a vintage crank, the Drillium is cold forged in modern high-strength alloy. The 7075 alloy chainrings are highly durable, featuring ramps and pins for fast and smooth shifting with 6-10 speed drivetrains. The crank arms have classically styled reliefs, and the alloy dust caps function as self extractors with the supplied crank bolts. - Spindle interface: square taper JIS - BCD: 110mm - Weight: 645g
Shimano SLX M7000-2 Crankset
$129.99
- Solid pedaling efficiency - New 3D composite chain ring teeth composition is optimized for each chainwheel load out - Balance of strength and weight in 2-piece crank construction - Improved driving rigidity - Close ratio gear combination for minimum shifting gap and maintaining rhythm - Enhanced chain retention - Better sealing and better rotation - Small ball bottom bracket - Series : SLX - Crank Construction: HOLLOWTECH II Technology - Bottom Bracket: BB-MT800/BB-MT800-PA - Chain Line: 48.8 - Average Weight: 788.7g (28-28T) 761.4g (36-26T) 739.8g (34-24T)
Campagnolo H11 Crankset
$720.00
Designed specifically for use with H11 groupsets. Full Carbon crank arms and spider are hollow for maximum stiffness and minimal weight. Utilizes USB ceramic ball bearings. Light weight hard anodized alloy chainrings and alloy chainring bolts. Utilizes Campagnolo's Ultra-Torque crank system. - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - USB ceramic bearings increase smoothness and decrease rolling resistance, weight and the need for maintenance. USB bearings are 50% smoother than standard Campagnolo bearings - Ultra-Torque system have both drive and non-drive side bearings pre-installed - Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Required for use with H11 Ergopower shift levers, the crank spider is shifted outward to adjust for 135 and 142mm hub spacing while maintaining the Q-Factor - Requires use of Ultra-Torque bottom bracket cups
Campagnolo Record 12x2 Speed Crankset
$580.00
The new Record 12x2 Speed crankset: a new hole-free design for the right-hand crank that optimizes aerodynamics. The new carbon fiber Record 12x2 Speed crankset with unidirectional finishing guarantees continuity with the finishing of the entire groupset, whilst maintaining the Ultra-Torque bracket system on the steel axle to ensure perfect transmission of power. The new Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters without affecting the Q factor that remains constant at 145.5 millimeters. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) enable reducing the weight through greater use of carbon fiber. There are eight fixing screws for increased structural stiffness. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
Wheels Manufacturing Inc. 30mm ID Crank Spindle Spacer
$4.00 - $6.00
Used to adjust crank chainline or ensure proper bearing preload when using 30mm spindle cranks. - Inner Diameter: 30mm - Outer Diameter: 41.5mm - Machined engineering-grade Delrin - Sold Individually
SRAM RED DUB Crankset
$690.00
The SRAM RED crankset leverages a pivotal design innovation: smaller chainrings and a wider cassette range. This leads to smoother and faster shifting up front and more useful gearing for today’s riders. The new configurations improve cadence and efficiency while also delivering shifts that are crisp, clean, and quick—every time. - X-Range gearing technology gives you more range and a smoother gear progression, so you’re always in the right gear - Improved front shifting performance for crisp and accurate front shifts - Unique chainring design results in a lighter weight, stiffer, more durable crankset - DUB bottom bracket adds durability, simplicity, and broad compatibility - Can be upgraded to a power meter - Version: D1
Race Face M15 bolt for 2008+ Evolve and Ride
$4.55
Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.
WeThePeople Legacy Crank
$139.99
The Legacy crank uses a super tough 2-1/2 piece construction, a larger 22mm spindle and square shaped chromoly arms to maximize strength. WeThePeople toughened up areas like the pedal boss with its own investment cast gusset, to beef things up. - Designed for use with a 22mm Mid Bottom Bracket (not included) - Full seamless Japanese 4130 chromoly tubing, liquid post heat-treated - Grind-friendly, square-shape arms - RSD/LSD compatible
Promax HF-2 Crank Set
$299.99
Promax HF-2 BMX Cranksets are Promax’s top-of-the-line crank offering. Hollow-forged from 6061-T6 aluminum, both crank arms are hollow so they are super stiff, yet lightweight. The crank arms spin on a beefy 24-millimeter spindle permanently fitted into the drive-side arm. The HF-2 is available in anodized red, blue, gold, and black in 170, 175, and 180mm lengths. Now also available in 172.5 and 177.5mm lengths in black only. - Bottom bracket sold separately - Pedal washers included - Meets or exceeds ENBMX standards - Chainline: 43mm - Q-Factor: 167mm - BCD: 104mm - Weight: 29.5 oz.
Shimano Dura-Ace 9000 Left Crank Arm
$242.00
Shimano Dura-Ace Left Crank Arm. - Spindle Interface Type: Hollowtech II
Shimano XTR M9000 Chainring Bolt and Cap Set
$117.00
Shimano Chainring Bolts - For use with M9000 chainrings
Race Face Turbine CINCH Crank Arm Set
$199.99
The Turbine continues setting the benchmark for performance aluminum cranks and cements the Turbine legacy. Featuring the proven Race Face Cinch System interface, the Turbine is an incredibly light & stiff performance crank-set for today's modern XC, trail and all-mountain rider. Imagine interchangeable spiders, limitless ring combinations, a 30mm alloy spindle and compatibility across all relevant frame standards. Interested in counting watts? The Turbine crankset is compatible with the new CINCH Power Meter. Quite possibly the most versatile crankset you will ever own. - Deep pocket forged and CNC machined aluminum crank arms - Compatible with the Race Face CINCH Power Meter - Removable spider offers the ability to convert between existing chainring standards while remaining flexible to future developments
Easton Asymetric CINCH Spider
$16.99
- Asymmetric four arm shape for greater stiffness in the power zones of the pedal stroke - Compatible with 9/10/11 speed chains, mounts using a common Park BBT-22 tool
Easton Chainring Bolts
$16.99
- Chainring bolts for double cranks - Torx heads
Easton EC90 SL Spider and Ring Assembly
$149.99
The Easton Spider and Ring assembly features the Cinch Direct Mount System, making a swap between ring configurations a fast and simple procedure. This system also provides a significant weight savings by eliminating the material overlap and extra bolt hardware that is required for a traditional spider with chainring configuration. - EA90 Aluminum
Race Face Next R CINCH Crank Arm Set
$479.99
Pedal-heavy outings with rowdy all-mountain shredding can be very demanding on cranks. The Next R CINCH Crankset is light and strong where it matters most. Racing time or just rallying with friends, feel free to get a bit more sideways with Next R. - Manufactured from UD Carbon with matte clearcoat - Cinch technology for game-changing compatibility - Includes 30mm spindle, for 68/73mm BB shells
Race Face Ride CINCH Crank Arm Set
$99.99
RaceFace Ride crank arms are forged from 6066 aluminum with aggressive styling for a high strength to weight ratio. - Bottom bracket sold separately
SRAM Force 1 DUB Crankset
$420.00
SRAM pioneered the 1x drivetrain, and the SRAM Force 1 crankset evolves the innovation. It’s lighter, stronger, and simpler—non-aero chainrings can now be installed with a single tool. For cross, TT, tri and crits, this is the king of 1x. - Single-ring drivetrain simplifies functionality and reduces weight - 48t variant has direct mount aero chainrings for better aerodynamics - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - DUB bottom bracket adds durability and simplicity - Can be upgraded to a power meter
Page 1 of 8 Next page