Filter By:
- Rigid (53)
- Suspension (83)
- Show More Brands
- Show Fewer Brands
Forks

$525.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Custom DT RWS Skewer included
- 3.0" max recommended tire size
- Axle to Crown Length: 480mm
- Brake Mount: IS Disc Brake 160mm
- Crown Race: 40
- Defined Color: Black
- Front Axle: 15 x 100mm
- Offset: 51mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: Tapered
- Weight: 750 grams
- Wheel Size: 29-inch
$565.00
For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more.
- 15mm thru-axle with 110mm Boost spacing
- Post-style brake mount
- 1.5" tapered carbon steerer
- Two sets of Three-Pack mounts
- ASTM Condition 3 - For rough off-road riding and jumps less than 24"

$575.00
A purpose built carbon fiber fork for gravel and cyclocross applications featuring internal hose routing, flat mount brake compatibility, and clearance for up to 50mm tires. This fork is perfect for gravel riders looking for more clearance, weight savings, compliance, and the versatility of fender mounts to enhance their gravel grinding experience.
- Material: Carbon
- Weight: 520g
- Steer Tube Length: 350mm
- Rake: 50mm
- Axle To Crown: 395mm
- Max Rotor Size: 140mm – 160mm
- Max Tire Clearance: 700c x 50c, 27.5 x 2.25-inch
- Crown Race Diameter: 1.5-inch
- Torque Spec - Steer Tube: 5.5Nm
- Torque Spec - Axle: 8Nm

$450.00
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness.
When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.

$181.00
A day of slicing through sweet ribbons of singletrack on a bike sporting a RockShox 30 Silver will leave you smiling all the way to the bank. Race-proven plushness and ease of setup means more time on the trail and less time tinkering. Lightweight and packed full of legendary RockShox technology, the 30 Silver is sure to boost the level of your ride without boosting your wallet in the process.
- TurnKey damper
- Crown Race: 30mm
- Steerer Tube Length: 265mm
- Positive Spring: Coil
- Negative Spring: Coil
- External Adjustments: Rebound Damping, Low Speed Compression Damping
- Maximum Tire Width: 62mm
- Maximum tire size: 26 x 2.4"

$449.99
Up your game with this all-Carbon rigid fat bike fork. Fitting up to 4.8" tires with a 26" wheel or 3.0" with a 27.5", this weapon will put your fat bike on the diet it deserves.
- Full OCLV carbon construction with tapered 1-1/8-1.5" headtube 51mm offset
- Accepts post mount brakes, up to 210mm max rotor size
- 490mm axle-to-crown length, fits up to 26 x 4.8" or 27.5 X 3.0" tires
- Includes 150x15mm thru-axle and carbon compression steerer plug
- Carbon armor replaceable dropout guards

$483.00
With bigger bikes there comes bigger demands. Thankfully, we created the 35 Gold to meet all of them, both in performance and value. Whether you have an E-MTB or MTB, the burly 35 Gold checks the box with our proven DebonAir spring and Motion Control damping. And new this year is an E-MTB-focused option with mounting points for optional full or short fenders. All told, you might wonder how we packed so much quality and performance into such a wallet-friendly package.
Features
- New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (1.8" taper available)
- New graphics are easy to read and make a fresh impact
- Motion Control damping featuring low-speed compression adjustment to lockout
- Highly tunable DebonAir spring offers a consistent feel throughout the travel
- Fits Tires up to 2.8" (without fenders; the use of a full fender will reduce tire clearance)
- Fast Black finished 35mm aluminum upper tubes couple stiffness and lightweight with a premium look
- Offset: 44mm

$376.00 - $408.00
Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping.
Features
- New graphics package with E-MTB endorsement option (15x110mm)
- Motion Control damping featuring low-speed compression adjustment to lockout
- Fits Tires up to 2.8"
- Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look
- Highly tunable Solo Air spring

$914.00
This is the Pike DJ. It's a cousin to the award-winning Pike, which makes it look a lot like a trail fork — until you ride it. Pike DJ is built on a stout 35mm chassis and includes a custom-tuned Charger damper and specific Solo Air system designed for more bottom-out progression than you'll ever need because your trails eventually require some landings.
- New graphics package for a fresh, premium look
- Proven Charger damper with specific Dirt Jumping/Slopestyle tune
- Specific Solo Air top cap for extra bottom-out progression
- Accepts Bottomless Tokens to easily custom-tune the air spring performance to best match your own riding style and suspension preference

$537.00
One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from SID. It features a chassis that combines classic XC performance with light trail duties, while a Motion Control damper completes the package, making Reba more capable than ever before.
Features
- New graphics package for a fresh, premium look
- Highly tunable Solo Air spring
- TwistLoc and OneLoc remote compatible

$537.00
Revelation is all grown up and ready to explore, wherever the trail may turn. Value-packed, the Revelation features an updated DebonAir spring paired with a Motion Control damper and 35mm Fast Black upper tubes.
- Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain
- Motion Control damping featuring low-speed compression adjustment to firm
- Chassis is derived from the renowned Pike fork
- New graphics package for a fresh, premium look

$210.00 - $322.00
Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Silver level forks give you stiff steel upper tubes and TurnKey lockout.
Features
- New graphics package with E-MTB endorsement option (15x110mm)
- TurnKey lockout gives 'on/off' control
- Fits Tires up to 2.8" (15x110mm)
- Fast Black finished 30mm steel upper tubes couple stiffness and lightweight with a premium look
- Plush, highly tunable Solo Air spring
- Disc brake compatible
- Offset: 51mm (29-inches)
- Steerer Diameter: 1.5-inch Tapered

$843.00
- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible.
- Charger RC damper featuring Low Speed Compression adjust
- DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
- RockShox premium short fender included
- Maxima Plush damping fluid reduces friction and silences damper noise

$537.00
Yari shares the stiff, hard-hitting chassis as the Lyrik and combines it with the updated DebonAir air spring and proven Motion Control damper. The Yari fork is designed to inspire confidence for those hard-hitting enduro and E-MTB riders alike.
- Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain
- New graphics package for a fresh, premium look
- Motion Control damping featuring low-speed compression adjustment

$1,149.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
- Updated Crown Design saves up to 20 grams, and offers significant structural improvements

$1,249.00
FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability.
- The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs
- Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality
- The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release
- Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping
- Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button
- The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding

$1,249.00
FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability.
- The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs
- Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality
- The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release
- Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping
- Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button
- The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding

$144.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. Investment cast 1pc drop outs for maximum strength and a super sleek finish. Features an updated top cap retention design.
- 1-pc machined steerer tube with an integrated bearing race
- Tapered legs
- Tire clearance for 2.40” tires
- Updated top cap retention design

$130.00
The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. The fork’s new crown provides ample clearance for 26 x 2.1 tires and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube.
- Axle-to-crown: 26" = 376mm
- Offset: 45mm
- Steerer: 26" (42–54cm frames) = 300mm; 26" (56–62cm frames) = 400mm
- Tire Clearance: 26 x 2.1"
- Weight: 26" = 2.1 lb (0.97kg) uncut

$89.99
700c Hybrid fork with Cantilever Mounts
- Forged dropouts with eyelets, straight-gauge oval-tapered blades
- Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing
- Welded unicrown construction
- Clearance for 50mm wide fenders (1 1/8-inch)
- Axle to Crown Length: 403mm (1 1/8-inch); 412mm (1 1/8-inch SC); 403mm (1-inch)
- Brake Mount (Fork): Canti Studs
- Color: Black
- Crown Race: 30 (1 1/8-inch, 1 1/8-inch SC); 26 (1-inch)
- Front Axle: 10mm x 100mm
- Material: Steel
- Offset: 50 mm
- S.H.I.S. Stem Clamp Diameter: 28.6 (1 1/8-inch, 1 1/8-inch SC); 25.4 (1-inch)
- Steerer Tube Length: 300mm (1 1/8-inch); 260mm (1 1/8-inch SC); 300mm (1-inch)
- Steerer Type: Straight
- Weight: 975g (1 1/8-inch); 1105g (1 1/8-inch SC); 963g (1-inch)
- Wheel Size: 700c

$989.00
The 38 Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately.
- Black anodized upper tubes
- FIT GRIP damper and FLOAT EVOL air spring
- Three on-the-fly compression damping positions: Open, Medium, Firm
- Performance Series black-on-black graphics package

$268.00 - $376.00
With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike.
Features
- New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm version)
- New graphics are easy to read and make a fresh impact
- Motion Control damping featuring low-speed compression adjustment to lockout
- Fit Tires up to 2.8" (15x110mm version without fenders; the use of a full fender will reduce tire clearance)
- Fast Black finished 32mm steel upper tubes couple stiffness with a premium look

$18.00 - $43.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

$949.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Factory rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor.
- Genuine Kashima Coating on upper tubes
- 32 mm upper tubes and ample bushing overlap for a quality ride
- Hollowed out lower legs provide even more weight savings
- FIT4 damper and FLOAT air spring

$742.00
The iconic RockShox chassis got the fat treatment by reengineering it to meet the unique needs of fat tires and wheels. Everything from crown, to arch, to axle has been optimized to tackle the increased torsional loads of its wide stance. With more traction and control than ever before, you'll never be happier you went fat.
- Rebound
- Low speed compression
- 3-position compression (Open/Platform/Lock) damper adjustment
- Solo Air lets you add air to your forks through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously
- Fast Black coating on the upper tubes provides improved durability and decreased friction
- Rapid Recovery allows the fork to recovery faster between consecutive bumps, letting the wheel track the ground with greater precision
- Sag Gradients are printed right on the fork's upper tubes, making perfect suspension setup easy and accurate
- Air Guides - starting pressures noted on the back of the fork help you set up your suspension in seconds instead of minutes

$1,089.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths.
- Step-Cast chassis
- Genuine Kashima Coating on upper tubes
- FIT4 damper and FLOAT EVOL air spring
- Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities
- Kabolt Thru Axle

$1,159.00
- 38mm chassis for increased stiffness and rider confidence
- ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control.
- Charger 3 features a completely new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk".
- DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume, and higher overall ride height.
- Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible
- Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature
- Includes premium short fender

$498.99 - $537.00
One of the most successful and hard-working RockShox forks of all times capitalizes on the innovations born from the latest SID. A chassis that combines classic XC performance with light trail duties and a Motion Control damper completes the package, making Reba as capable as ever before.
- Proven Motion Control damper featuring low speed compression adjust to lockout with external rebound adjust
- Torque Caps compatible for a stronger, stiffer interface between fork and hub, giving you more control in the front wheel
- Accepts Bottomless Tokens to easily custom tune the air spring performance to best match you own riding style and suspension preference
- Solo Air spring for a plush, predictable ride you can set up in seconds

$612.00
One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from SID. It features a chassis that combines classic XC performance with light trail duties, while a Motion Control damper completes the package, making Reba more capable than ever before.
Features
- New graphics package for a fresh, premium look
- Highly tunable Solo Air spring
- TwistLoc and OneLoc remote compatible

$612.00
One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from the latest SID. A chassis that combines classic XC performance with light trail duties and a Motion Control™ damper completes the package, making Reba as capable as ever before.
- Proven Motion Control damper featuring low-speed compression adjust to lockout with external rebound adjust
- Torque Caps compatible for a stronger, stiffer interface between fork and hub, giving you more control in the front wheel
- Accepts Bottomless Tokens to easily custom tune the air spring performance to best match you own riding style and suspension preference
- Solo Air spring for a plush, predictable ride you can set up in seconds
Page 1 of 5
Next page