Handlebar Grips/Tape

The Ergon grip with a full size, multi-position bar end for maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling. Perfect for commuting, touring, or for those who like a longer bar end. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP5 eliminates numb hands, aching fingers, and tired forearms. The GP5 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Not suitable for use with carbon handlebars - Uses: touring, commuting - Clamp: fiberglass composite with rubber inserts

- Lightweight silicone grips that conform to your hand for maximum grip and shock absorption to reduce hand fatigue and arm pump - UV resistant and non-porous, they will not fade or harden - Non-slip grip compound that stays put even when wet - Fit XC: 13

- Lightweight silicone grips that conform to your hand for maximum grip and shock absorption to reduce hand fatigue and arm pump - UV resistant and non-porous, they will not fade or harden - Non-slip grip compound that stays put even when wet - Fit XC: 13

When you look at the start line of a race that's bound for rough roads, you're sure to see bar upon bar wrapped in cork tape. Why? Because it's tough to beat the vibration absorbing properties of this natural material. With the Specialized S-Wrap Cork Handlebar Tape, however, we managed to do one better. It features a dual-density design that pairs cork with EVA foam tape, and the result of this is an incredible reduction in hand fatigue. They also gave it an elastomer gel backing to heighten the aforementioned, as well as overall comfort. And for easy installation, they kept everything highly stretchable and low in profile. - Low-profile cork/EVA foam tape is sleek and comforting over rough roads. - Elastomer gel backing provides additional comfort and vibration damping. - Easy-stretch tape with feathered edges creates a smoot, low profile wrap. - Bar end plugs included.

Specialized's BG Contour Locking Grips are medically designed with an ergonomic shape that offers excellent support and protection, while the soft-density outers provide an outstanding grip and superb comfort. Available in two sizes for a perfect fit, the Contours also include locking clamps to keep them in place on your handlebars.

Specialized's Contour XC Grips were designed with your hands in mind. Engineered in conjunction with a hand surgeon, these grips relieve hand pressure to keep you feeling great. So not only do you get cushy comfort and a great grip on the bars, you also stay in total control. These grips lock on to your bars so you know they'll stay put.

- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)

SRAM's Locking Foam Grips offer the soft feel of foam with the easy installation and security of a lock-on grip.

Give your bike some personality and a comfy ride with Profile Bar Wrap. This beautiful handlebar tape will definitely make you stand out in a crowd. And, with extra stretch and length, it's easy to wrap, too!

WTB's Dual Compound grips are perfect for XC, trail and comfort riding. They feature plush outer gel and tight, twist-resistant bases for comfort and control. And, the linked, diamond-shaped WTB logos and slightly raised centers provide an ergonomic feel and maximum grip in tough conditions.

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.

Silicone provides a great balance of softness and grip for MSW's bar tape. And in contrast to traditional bar tape, silicone tape can be wrapped and unwrapped multiple times without issue. • Reduces hand fatigue and numbness • Suitable for all weather conditions • Customize feel by wrapping at different tensions

- Embossed carbon-look weave pattern and self-adhesive backing - Includes carbon look, black plastic end plugs and finishing strips

- 30.3Mm thick durasoft polymer (Dsp) - Micro-Chevron grip pattern for superior comfort, Feel and control - Ultra lightweight at 27 grams per set - Includes plugs and double sided tape

Lizard Skins' Moab Grips are an awesome upgrade for your bike. Easy to install, these single-compound grips offer a comfortable texture that lets you easily hold on for great control.

- 32.3Mm thick durasoft polymer (Dsp) - Micro-Chevron grip pattern for superior comfort, Feel and control - Ultra lightweight at 30 grams per set - Includes plugs and double sided tape

When two companies known for creating comfortable products collaborate, you know the results are going to be good. THE SDG GRIP FEATURES: - A Unique circular ribbed dampener which spread pressure across your palm while still providing excellent control - The front side of the grip features ergonomically ramped logos that act like hooks for your fingers and provide excellent traction when hanging off the rear of the bike - Lock-On Grip System = 100% Slip Free performance - Includes Snap Cap End Plugs - Color match to your SDG Duster seat

ESI's new fit grips are designed for a completely natural hand position on your handlebar. Our new design balances the pressure that your hands exert onto the handlebars, increasing bar control dramatically. Fit grips have three distinct areas: INNER - This area is the perfect step up for your hands to rest against for maximum bar control in turns. MIDDLE - This area is perfect for extra torque and powering while climbing. OUTER - This thickest area is for better hand comfort, especially while descending. Each area of the fit grip flows flawlessly into each other creating the perfect hand placement naturally. Your hands instantly feel comfort when they grasp their unique shape, as if they were exclusively molded for your hands.

The North Shore mountains of British Columbia are home to some of the most amazing trails in the world. We are not only excited to announce the redesigned Northshore grip but also our new partnership with the North Shore Mountain Biking Association. A percentage of the proceeds from the sales of these grips are used to support the NSMBA and the trail building on the North Shore. The new Northshore grip is our thickest single compound grip and features a series of textured shock absorbing sections to provide a comfortable and controlled ride. - Length: 130 mm - Weight (with plugs): 112 grams - Diameter: 33.25 mm

- Closed-end design protects end of handlebar while looking good - Compatible with Salsa Backcountry Grips only - 30g for pair

Dimension Dual Density Flame Grip. - Classic-style grips for cruisers or mountain bikes - Flange: No - Grip Shift Specific: No - Length: 125mm - Lock On: No - Shape: Round -Weight: 74g

Inspiration can come from anywhere. For us it usually comes from beer receptacles. Wisconsin is a land of German immigrants. The tradition of beer brewing is vast and the consumption is hardy. So, when looking for a new pattern design for our 143mm grips we didn’t have to look much further than something our hands were already clutching-a stein of beer! It just so happens that a dimple pattern combined with a 2 ply soft rubber compound (29mm diameter) make the perfect grip pattern!

Rubber tires need to grip dirt. We took some of our favorite tread patterns, tweaked them- added a 2” flange and created a thick (31.5mm diameter) aggressive grip that absorbs vibration and is super sticky!

MSW Anti-Slip Gel+ tape brings the best of everything, giving you the comfort of silicone gel backing, the control of MSW's anti-slip coating, and the durability of micro-fiber cloth all in one package. - Micro-fiber layer reduces stretch and adds durability - PU material with anti-slip coating improves grip - Gel backing for extra padding, comfort and control - Silicone adhesive for easy install and clean removal - 78 inches (200cm) per roll - Finishing strips and bar end plugs included

MSW anti-slip bar tape provides positive contact with your handlebars and exceptional comfort during your most demanding rides. The flexible PU material makes this tape easy to install while the gel backing provides added comfort and clean hassle-free removal. - PU material with anti-slip coating improves grip over traditional cork material - Gel backing provides vibration damping and extra comfort - Silicone adhesive for easy install and clean removal - 78 inches (200cm) per roll - Finishing strips and bar end plugs included

Traditional EVA tape looks great on the bike and feels comfortable on the hands no matter how long the ride. EVA tape is flexible and comes with an adhesive backing so it wraps well and stays put during and after installation. - EVA vibration-damping foam increases grip and comfort - Adhesive backing for perfect bar placement - 78 inches (200cm) per roll - Finishing strips and bar end plugs included

The MacAskill grip features a larger diameter in key areas of the grip to provide better cushioning for impacts and vibration dampening. - Designed and ridden by Danny MacAskill - Single sided lock on grip - 29–30mm diameter

- Rigid plastic grip core interlocks with clamps on either end - Two sizes available: 130mm for standard, or 90mm for twist shifters - Sold as a set/pair and includes end plugs

F-1 Series Float Grips are made from our exclusive A.I.R.E. compound which infuses air into the grip, reducing weight by over 30% and providing a slower rebound and response for improved comfort. - Medium diameter (31.5mm) - Reinforced inner layer for added durability - Micro-textured surface pattern improves tackiness and control - Smooth profile for a consistent feel

Bring the stylish comfort of a well-worn baseball glove to your ride with Portland Design Works' Bourbon Grips. They're made from classically stitched, vegetable-tanned leather with polished aluminum lockrings for durability and a finish that'll only improve with age. - Durable, high-quality full grain leather - Sturdy machined aluminum alloy lockrings - Fits 22.0-22.2mm handlebars - Weight: 136g (4.8oz) per pair - Length: 130mm (5.1") each - Lifetime PDWarranty